The distinctive design of the Paris PH200 with its elegantly sculpted chassis carries the unique signature of the Paris series. The secret behind the overall tonal balance and performance of the Paris Phono Preamplifier lies in the careful selection and combination of the different components. The internal circuitry of the Paris PH200 is a two stage design. The first stage to amplify the faint signal coming from the phono cartridge in order to present the signal with an acceptable level to the straightening RIAA curve circuit. The second stage is to amplify the signal to the required output level of the PH200. Both amplifying stages were designed to optimize the signal to noise ratio of the PH200 which results in a very rapid and high dynamic contrast giving to the PH200 it's wonderful musicality!
Extreme care and attention has been applied to eliminate electrical line noise before it can access the Paris phono stage circuitry. The PH200 has been designed to accomadate use of both moving coil and moving magnet phono cartridges. The PH200 offers variable moving coil cartridge load settings and variable gain using jumper configurations on both the left and right channels.
The Paris PH200 will allow you to re-discover your record collection and will provide an enjoyable and satisfying musical experience!
Available in Red, White, Black or Titanium Finishes.
Frequency response: 20Hz - 20KHz @ +/- 1dB
Total Harmonic Distortion: 0,05% @ 20Hz – 20kHz
MC - Moving Coil Input Impedence: 100, 200, 511, 1k, 1.5K and 47k Ohms
MM - Moving Magnet Input Impedence: 47k Omhs
Input Capacitance: (moving magnet) 150pF
Input Sensitivity: 0,2mV and up
Gain MC: 41.5db, 52db, 62db
Gain MM: must be set at 41.5 @ 47k Omhs
Signal to Noise Ratio: > -80dB
Available in Black or Red.