The new Thorens TD 201 is the right choice for anyone looking for a robust, easy to use plug and play turntable. It comes with a smooth running belt drive and an aluminium platter with rubber mat. The new Thorens TP 71 tonearm uses a detachable headshell with preconfigured AT 3600 cartridge.

Special Features:
Using the switchable integrated phono stage the TD 201 can be connected to any amplifier or receiver even if it does not have a specific input for phono devices

Specifications:

• Drive System:  Belt Drive
• Motor:  DC Motor
• Speeds:  33 1/3 RPM, 45 RPM
• Rotation Speed Variation:  +/–2%
• Wow and Flutter:  0.2%
• Signal-to-Noise Ratio:  67dB or higher (A-weighted, 20kHz LPF), 60dB or higher (unweighted, 20kHz LPF)
• Platter:  Aluminum Die-cast
• Diameter of Platter:  12", 300mm

Tonearm:

• Type:  Static Balance, Straight
• Effective Arm Length:  8.8", 223.6mm
• Stylus Pressure Range:  0 to 4g
• Supported Cartridge Weight:  3.5 to 6.0g
• Overhang:  18.6mm
• Anti-skating Adjustment:  Supported

Cartridge:

• Type:  MM type (Audio-Technica AT3600)
• Stylus Construction:  Bonded Diamond
• Frequency Response:  20Hz to 20kHz
• Channel Separation:  >18dB
• Channel Balance:  2.5dB
• Vertical Tracking Angle:  20 degrees
• Supported Load Impedance:  47k ohms
• Output Voltage:  2.5mV (1kHz, 3.54cm/sec.)
• Stylus Pressure:  3.5g +/–0.5g
• Cartridge Weight:  5g +/–0.5g
• Head-shell Weight:  10g (including Screws, Nuts and Wires)

Analog Output:

• Connector:  RCA Pin jack (Gold-plated)
• Power:  AC 100 to 240V, 50/60Hz
• Power Consumption:  1.5W (less than 0.5W at Standby)
• Overall Dimensions (W x H x D):  420 x 355x 121mm
• Weight:  Approx. 3.9 kg