Product

Simaudio MOON 430HAD Headphone Amplifier with DSD Capable DAC

Visit Store
The Neo 430HA is the new reference for headphone amplifiers.  Includes DSD Capable DAC Made in Canada, the 430HA is a genuine “tour de force” loaded with numerous state-of-the-art features. This fully balanced, pure analog amplifier using a discrete transconductance... Read More

* This product is not available to purchase online. Please contact us for additional information.

The Neo 430HA is the new reference for headphone amplifiers.  Includes DSD Capable DAC

Made in Canada, the 430HA is a genuine “tour de force” loaded with numerous state-of-the-art features. This fully balanced, pure analog amplifier using a discrete transconductance circuit topology, selectable gain setting (14 or 20dB), an oversized power supply and a defeatable analog crossfeed circuit. Rated at 667mW at 600 ohms and 8W at 50 ohms, the 430HA will effortlessly drive any headphone to its full potential.

For headphone enthusiasts who desire perfection, the 430HA is the ultimate solution. The 430HA incorporates the most advanced analog audio circuitry and will achieve the very best possible sonic performance from your headphones. The optional DSD256 and 32-bit PCM capable DAC can be used with virtually any digital source such as computer for streaming music, satellite TV receiver or Blu-Ray player, offering the same fidelity as your music system.

Of course, key features are present such as 12V triggers and an RS-232 port for custom-install environments.

Available in Black Finish.

Design Features:

  • Inputs include 1 balanced on XLR’s, 2 single-ended on RCA’s and 1 single-ended on 1/8” jack located on the front panel.
  • Outputs include a pair of 3-pin XLR and one 4-Pin XLR located on the front panel behind a sliding window, a ¼” TRS jack, as well as both fixed and variable single-ended line-level RCA stereo pairs.
  • Four (4) stages of our own M-LoVo (MOON Low Voltage) DC regulation circuit to significantly lower the noise floor.
  • M-eVOL2 volume control with 530 steps and channel matching of 0.1dB.
  • Fully asynchronous DAC with four (4) digital inputs (S/PDIF x 2, TosLink x 1 & USB x 1) allowing for use with any virtual digital source; Supports DSD64, DSD128 and DSD256 (USB input only); Supports PCM up to 24-bit/192kHz (all inputs) and 32-bit/384kHz (USB input only). See

Specifications:

  • Amplifier Frequency Response
    • Audible:  20Hz - 20kHz ±0.1dB
    • Full Range:  5Hz - 100kHz +0/-3dB
  • DAC Frequency Response
    • Audible:  20Hz – 20kHz ± 0.2dB
    • Full Range:  5Hs – 72kHz +0/-3.0dB
  • Signal-to-Noise-Ratio
    • Amplifier:  120dB @ full output, 20Hz – 20kHz
    • DAC:  >116dB @ full output
  • Amplifier Distortion
    • THD:  20Hz – 20kHz, 0.005%
    • IMD:  0.005%
  • DAC Distortion
    • THD:  THD @ 1kHz, 0dBFS (A-weighted), <0.001%
    • IMD:  IMD, <0.004%

General Specifications:

  • Headphone Impedance:  20 - 600Ω
  • Output Power per Channel @ 600 / 300 / 50Ω:  667mW / 1.33W / 8W
  • Intermodulation Distortion:  0.005%
  • Signal-to-Noise Ratio:  120dB
  • Crosstalk:  110dB
  • Input / Output Impedance:  22KΩ / 1.25Ω
  • Shipping Weight:  20 lbs / 9 kgs
  • Dimensions (width x height x depth):  16.9 x 3.5 x 13.8 in / 42.9 x 8.9 x 35.1 cm
      Read Less